-
-
-
The attachment points may differ depending on the year of manufacture and the type of model.
Front bumper
-open the hood.
-under the hood, take out the four screws that secure the top of the bumper.
- (if any) around the perimeter of the lower part of the bumper, unscrew the screws (twisted from bottom to top).
-wheel the wheels to the side.
-in the wheel arches, Unscrew the screws that secure the wheel arch liners and the sides of the bumper.
-release the clips in the wings (pull the corners of the bumper forward).
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-remove the rear trunk trim.
-Unscrew six nuts behind the casing.
-remove the taillights.
-Unscrew the screws in the trunk opening.
-in the wheel arches, Unscrew the screws that secure the wheel arch liners (rear part) and the sides of the bumper.
-Around the perimeter of the lower part of the bumper, take out the clips (inserted from bottom to top).
-release the clips in the wings (pull the corners back).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español