-
-
-
Depending on the year of manufacture, the attachment points may differ slightly.
Front bumper
-open the hood.
-take out the four pistons and unscrew the two screws that secure the upper part.
-in the wheel arches, Unscrew three screws on each side and one on the bottom side that secure the wheel arch liners (front part).
-behind the wheel arch liners, Unscrew three screws on each side that secure the corners of the bumper to the fenders.
-release the latches in the wings.
-release the latches from the bottom.
-with an assistant, we pull the bumper forward (we look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, unscrew the two screws
-in the wheel arches, Unscrew the screws that secure the wheel arch liners and the sides of the bumper.
-take out the rivets that secure the bottom of the bumper.
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español