How to remove front and rear bumper Ford Fusion (after 2012)

Depending on the year of release of the attachment can vary.

Front bumper

-open the hood.

-under the hood, take out nine of the caps and remove the cover.

-under the panel pulls out two pistons and Unscrew the three screws that secure the top.

-around the bottom part Unscrew the screws and take out the caps (twisted and inserted from the bottom up).

-depending on hand wrenched up to the stop wheel.

-wheel arches pulled three pistons on each side that attach the fender liner to the bumper.

-the fender liner, Unscrew the screws holding the corners of the bumper to the wings.

-with the assistant release the latch in the wings (pull the corners to the sides), and gently pulls the bumper forward.

-remove the connectors from the fog lights.

Rear bumper

-open the trunk lid.

-Unscrew the screws and remove the tail lights.

-the rear lights take out the caps.

-Unscrew the screws and take out the caps on the perimeter of the bottom of the (twisted and inserted from the bottom up).

-Unscrew the screws and take out the pistons in the wheel arches (so as not to remove the wheels you can turn a ratchet with a nozzle) that attach the fender liner.

-the fender liner, Unscrew the screws holding the corners of the bumper to the body.

-with a helper pick up the latch in the wings (pull the corners to the sides), and gently pulls the bumper back.

-Remove the connector from the PDC (if any).

How to remove front and rear bumper Ford Fusion (2002 - 2012)