How to remove front and rear bumper Ford Fiesta (2002-2008)
Depending on the year of manufacture, the attachment points may differ slightly.
Front bumper
-open the hood.
-remove from the latches and remove the radiator grill (unscrew the screw under it, if any).
-in the wheel arches, Unscrew the screws that secure the wheel arch liners (front part).
-under the wheel arch liners, Unscrew three screws (there may be two screws, depending on the year) that attach the corners of the bumper to the wings.
-release the latches in the wings.
-release the latches under the radiator grill and from the bottom.
-with an assistant, we pull the bumper forward (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
-in the opening of the trunk, we drill two metal rivets that secure the upper part of the bumper.
-in the wheel arches, take out the rivets that secure the wheel arch liners.
-take the wheel arch liners to the side and unscrew one screw on each side (twisted from top to bottom) that secure the corners of the bumper to the fenders.
-Unscrew the screws (twisted from bottom to top) that secure the bottom of the bumper.
-release the latches in the wings (pull the corners of the bumper towards you).
-with an assistant, we pull the bumper back (look behind the wires).
-disconnect the connectors of the electrical equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español 
