How to remove front and rear bumper Honda Pilot (2016-2021)

Front bumper

-open the hood.

-we release the caps and remove the trim over the grille (air intake).

-unscrew the four screws, release from the latches in the headlights (pull towards you) and remove the upper part of the grille.

-take out the four pistons (inserted from top to bottom) that secure the grille.

-we release the upper part of the radiator grille from the latches (you need to press the latches with a screwdriver).

-take out the four pistons and Unscrew the eight screws (twisted and inserted from the bottom up) that secure the bottom of the bumper.

-turn out the wheels (depending on which side we will disassemble).

-in the wheel arches, Unscrew the screws and release the latches that secure the wing linings (moldings) (you can not completely remove).

-under the lining, Unscrew the screws that secure the sides of the bumper and fender liner.

-we release the latches in the wings and under the headlights (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors.

Rear bumper

-open the trunk lid.

-unscrew the two screws near the rear lights.

-take out the three pistons and Unscrew the four screws (inserted and tightened from the bottom up) that secure the bottom of the bumper.

-in the wheel wells, Unscrew the screws that secure the wing lining (moldings).

-we release from the latches (pull towards ourselves) the lining of the wings (completely you can not remove).

-under the lining, Unscrew the screws that secure the sides of the bumper and fender liner.

-we release the latches in the wings and under the rear lights (pull the corners of the bumper towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.

How to remove front and rear bumper Honda Pilot (2003-2008)

How to remove front and rear bumper Honda Pilot (2009-2015)