How to remove front and rear bumper Honda Logo

Depending on the year the site of attachment may vary.

Front bumper

-open the hood.

-under the hood take out the rivets that secure the upper part.

-perimeter of the lower part and pull out the caps and Unscrew the screws (twisted and inserted from the bottom up).

-wrenched the wheel depending on which way we understand.

-wheel arches take out the rivets and removed the fender liner.

-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.

-with an assistant, carefully release the latches in the wings under the headlights (pull the corners to the sides and forward) and pulls the bumper forward.

-snap together the connectors of the fog lights (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the screws.

-on the perimeter in the lower part and pull out the caps and Unscrew the screws (twisted and inserted from the bottom up).

-wheel arches take out the rivets and removed the fender liner.

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-with the assistant gently pulls the bumper back.

-releasable connector Parking assist (if any).