-
-
-
Depending on the body type of the attachment may vary.
Front bumper
-open the hood.
-under the hood, Unscrew the screws (spun down) that secure the upper part.
-around the bottom part Unscrew the screws (spun up).
-wrenched the wheel depending on which way we understand.
-wheel arches, peel the fender liner.
-attach the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-pulls the bumper forward with the assistant.
-snap together the connectors of the equipment (if any).
Rear bumper
-wheel arches twist of guilt that attach the wheel arch liners (easier to Unscrew the ratchet with a nozzle).
-remove the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-Unscrew the screws that attach the lower part (spun up).
-open the trunk lid.
-in the opening of the trunk, Unscrew the screws.
-with the assistant gently pulls the bumper back.
-remove the electrical connectors (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español