Front bumper

-open the hood.

-under the hood, Unscrew the seven screws and pull out ahead of the grille.

-under the grille pulls out five caps (inserted upside down).

-around the bottom part Unscrew the screws (spun up).

-wrenched the wheel depending on which way we understand.

-wheel arches, peel the fender liner.

-remove the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-carefully, trying not to scratch the paint on the wings, pulls the bumper forward with the assistant.

-snap together the connectors of the equipment (if any).

the attachment of the front bumper Honda CR-V 1 (1995-2001)

scheme of fastening of the radiator grille Honda CR-V 1 (1995-2001)

scheme of fastening of front bumper Honda CR-V 1 (1995-2001)

Rear bumper

-in the wheel wells, Unscrew the screws holding the mud flaps and arch liners (easier to Unscrew the ratchet with a nozzle).

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-take out the two clips that secure the lower part (inserted from the bottom up).

-open the trunk.

-in the opening of the trunk Unscrew two screws and take out the five caps.

-we release the latch in the wings (pull on itself, and back).

-with the assistant gently pulls the bumper back.

-remove the electrical connectors (if any).

the attachment of the rear bumper Honda CR-V 1 (1995-2001)

diagram of rear bumper Honda CR-V 1 (1995-2001)