Depending on year of manufacture and the country of origin of the attachment points are slightly different.

Front bumper

-open the hood.

-take out four cap (the inserted top to bottom) that secure the upper part.

-around the bottom part Unscrew the screws and take out the caps (twisted and inserted from the bottom up).

-wrenched the wheel depending on which way we understand.

-wheel arches, peel the fender liner.

-the fender liner, Unscrew the screws holding the corners of the bumper to the wings.

-with an assistant, carefully release the clips in the wings and under the headlights and pulls the bumper forward.

-snap together the connectors of the fog lights.

the attachment of the front bumper Honda Fit/Jazz (2001-2007)

the scheme of fastening of a forward bumper for Honda Fit/Jazz (2001-2007)

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

-wheel arches Unscrew the screws that attach the fender liner.

-attach the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings

-Unscrew the screws and take out the rivets that secure the lower part of the (twisted and inserted from the bottom up).

-open the trunk lid.

-at the corners of the opening of the trunk, Unscrew one screw from each side.

-carefully with the assistant release the latch in the wings and under the rear lights (pull the corners into themselves and back).

-pulls the bumper back.

-snap together the connectors of electrical equipment.

the attachment of the rear bumper Honda Fit/Jazz (2001-2007)

diagram of rear bumper Honda Fit/Jazz (2001-2007)

 

How to remove front and rear bumper Honda Fit/Jazz (2007-2013)

How to remove front and rear bumper Honda Fit/Jazz (2013-2020)