-
-
-
Depending on the model year and body type of attachment may vary.
Front bumper
-open the hood.
-under the hood take out the ten clips and remove the pad (rests on the latch) on the radiator grille.
-around the bottom part Unscrew four screws and remove six caps (twisted and inserted from the bottom up).
-wrenched the wheel depending on which way we understand.
-wheel arches, peel the fender liner.
-remove the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners to the sides) and under the headlights.
-pulls the bumper forward with the assistant.
-if you have headlight washers, disconnected the hoses (may leak the fluid).
-snap together the connectors of the equipment (if any).
Rear bumper
-wheel arches Unscrew the guilt that secure the wheel arches (turn off the ratchet with a nozzle).
-remove the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-on the perimeter in the bottom part pulls out five caps (inserted from the bottom up).
-open the trunk lid.
-in the opening, Unscrew the two screws.
-we release the latch in the wings, under the tail lights and the opening of the trunk.
-with the assistant gently pulls the bumper back.
-remove the connectors from the sensors (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español