How to remove front and rear bumper Honda Legend KA9 (1996-2004)

Front bumper

-open the hood.

-under the hood take out five caps (inserted from top to bottom).

-from the bottom, take out the caps and Unscrew the screws (twisted and inserted from the bottom up) that secure the lower part of the bumper.

-turn the wheels to the side.

-in the wheel arches release the fender liner.

-Unscrew one screw on each side that attach the corners to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect the fog lamp connectors (if any).

Rear bumper

-open the trunk lid.

-remove the rear and side trunk trim.

-behind the skins, Unscrew the four bolts securing the bumper amplifier to the body.

-take out the five caps in the opening of the trunk.

-at the bottom, take out the five caps (inserted from the bottom up).

-in the wheel wells, Unscrew three screws on each side that secure the fender liner (rear).

-Unscrew one screw (spun up) that secure the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).