Depending on the model year and body type of attachment may vary.

Front bumper

-open the hood.

-under the hood take out the caps that secure the grille.

-around the bottom of the bumper take out the caps (inserted from the bottom up).

-turn the wheels to the side.

-in the wheel wells, Unscrew the screws that secure the fender liner (front).

-Unscrew one screw on each side (spun up) that attach the corners to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you) and under the headlights.

-with an assistant, pull the bumper forward (look behind the wires and hoses).

-disconnect electrical connectors (if any).

-(if any) disconnect the headlight washer hoses.

front bumper attachment points Honda City (2008-2014)

scheme of fastening of the radiator grille Honda City (2008-2014)

the scheme of fastening of the front bumper of the Honda City (2008-2014)

 

Rear bumper

-Open the trunk lid.

-from the trunk, Unscrew the nuts and remove the rear lights.

-in the opening of the trunk, Unscrew the two screws.

-on the perimeter of the lower part we take out six caps.

-in the wheel wells, Unscrew the screws that secure the fender liner (rear).

-remove the fender liner to the side and Unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches under the rear lights and in the opening of the trunk.

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors (if any).

rear bumper attachment points Honda City (2008-2014)

"the