Depending on the body type of the attachment may vary.
-open the hood.
-under the hood take out the seven rivets (inserted from top to bottom) that secure the upper part.
-Unscrew the screws that attach the lower part (spun up).
-wrenched the wheel depending on which way we understand.
-wheel arches, peel the fender liner.
-attach the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-we release the latch in the wings and under the headlights.
-pulls the bumper forward with the assistant.
-snap together the connectors of the equipment (if any).
-wheel arches free lockers (if any).
-remove the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-Unscrew the screws and take out the rivets that secure the lower part of the (twisted and inserted from the bottom up).
-open the trunk lid.
-in the opening of the trunk take out the caps.
-(depending on body type) if the amplifier is attached to the bumper from the trunk, Unscrew the four screws.
-we release the latch in the wings.
-with the assistant gently pulls the bumper back.
-remove the electrical connectors (if any).