-
-
-
Depending on the model year and body type of attachment may vary.
Front bumper
-open the hood.
-under the hood take out two pistons (inserted upside down).
-around the bottom part, Unscrew two screws and remove six caps (twisted and inserted from the bottom up).
-wrenched the wheel depending on which way we understand.
-wheel arches, peel the fender liner.
-remove the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-we release the latch in the wings and under the headlights.
-pulls the bumper forward with the assistant.
-snap together the connectors of the equipment (if any).
Rear bumper
-wheel arches take out the rivets that attach the fender liner.
-remove the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.
-in the bottom part pulls out with two clips (inserted from the bottom up).
-open the trunk lid.
-in the opening of the trunk pulls out five caps.
-we release the latch in the wings and under the tail lamps.
-with the assistant gently pulls the bumper back.
-remove the connectors from the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español