Front bumper
-open the hood.
-under the hood we take out fifteen caps and remove the trim over the grille (air intake).
-remove the emblem in the grille (you need to press on the latches on the back side of the grille and pull the emblem forward).
-Unscrew the four screws, release from the latches (pull towards you) and remove the upper part of the grille.
-take out the four pistons (inserted from top to bottom) that secure the grille.
-we release the upper part of the grille from the latches (latches).
-around the bottom of the bumper, take out the four pistons and Unscrew the eight screws (twisted and inserted from the bottom up).
-turn out the wheels (depending on which side we will disassemble).
-in the wheel wells, Unscrew two screws on each side that secure the wing lining (moldings).
-we release the front part of the lining from the latches (you can not completely remove it).
-under the covers, Unscrew the screws that secure the sides of the bumper.
-we release the latch in the wings (pull the corners of the bumper towards you).
-we release the latches under the headlights.
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew the two screws.
-at the bottom of the bumper take out the three pistons and Unscrew the four screws (inserted and screwed up).
-in the wheel wells, Unscrew the screws that secure the wing lining (moldings).
-we release from the latches (pull towards ourselves) the lining of the wings (completely you can not remove).
-under the covers, Unscrew the screws that secure the sides of the bumper.
-we release the latch in the wings (pull the corners of the bumper towards you).
-we release the latches under the rear lights.
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.
How to remove front and rear bumper Honda Passport (1997-2002)