Front bumper
-open the hood.
-under the hood we take out seven caps (note the caps are of different sizes), release them from the latches and remove the trim over the grille.
-under the trim take out the four pistons (inserted from top to bottom).
-take out ten caps (inserted from the bottom up) that secure the bottom of the bumper.
-turn the wheels to the side.
-in the wheel wells, Unscrew the screws that secure the fender liner and bumper corners to the wings.
-we release the latches in the wings and under the headlights (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-unscrew the two screws in the opening of the trunk.
-take out eight caps (inserted from the bottom up) that secure the bottom of the bumper.
-in the wheel wells, Unscrew the screws that secure the fender liner and bumper corners to the wings.
-we release the latches in the wings and under the rear lights (pull the corners of the bumper towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.