Front bumper
-open the hood.
-take out the eight clips (inserted from top to bottom) that secure the cover plate and the top of the bumper.
-released from the grooves (pull push) and remove the cover.
-around the bottom part Unscrew four screws and take out the five caps (twisted and inserted from the bottom up).
-wrenched the wheel depending on which way we understand.
-wheel arches, peel the fender liner.
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-with an assistant, carefully release the clips in the wings and under the headlights and pulls the bumper forward.
-snap together the connectors of the fog lights.
-if you have headlight washers, disconnected the hoses (may leak the fluid).
Rear bumper
-around the bottom part Unscrew the two screws and take out the five caps (twisted and inserted from the bottom up).
-wheel arches, peel the fender liner.
-attach the fender liner to the side and Unscrew one screw on each side holding the corners of the bumper to the wings
-open the trunk lid.
on the sides of the opening of the trunk Unscrew two screws on each side.
-carefully with the assistant release the latch in the wings and under the rear lights (pull the corners into themselves and back).
-we release the latch in the opening of the trunk.
-pulls the bumper back.
-snap together the connectors of the equipment (if any).
How to remove front and rear bumper Honda Fit/Jazz (2001-2007)
How to remove front and rear bumper Honda Fit/Jazz (2013-2020)