Front bumper
-open the hood.
-take out twelve rivets (inserted from top to bottom) that secure the cover plate over the grille and top of bumper and remove the plate.
-perimeter of the lower part and pull out the caps (inserted from the bottom up).
-wrenched the wheel depending on which way we understand.
-wheel arches, peel the fender liner.
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-with an assistant, carefully release the clips in the wings and under the headlights and pulls the bumper forward.
-snap together the connectors of the fog lights.
-if you have headlight washers, disconnected the hoses (may leak the fluid).
Rear bumper
-perimeter of the lower part and pull out the caps (inserted from the bottom up).
-in the wheel wells, Unscrew the screws holding the wheel arches and corners of the bumper.
-open the trunk lid.
-in the corners of the opening, Unscrew the screws.
-we release the latch in the wings and under the rear lights (pull the corners into themselves and back).
-with the assistant gently pulls the bumper back.
-releasable connector Parking assist (if any).