-
-
-
Depending on the model year and body type of attachment may vary.
Front bumper
-remove repeaters of indexes of turns (if any).
-around the bottom part Unscrew the screws and take out the caps (twisted and inserted from the bottom up).
-wrenched the wheel depending on which way we understand.
-wheel arches, peel the fender liner.
-remove the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.
-from the engine compartment Unscrew nuts of fastening of the amplifier.
-pulls the bumper forward with the assistant.
-snap together the connectors of the equipment (if any).
Rear bumper
-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner.
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-at the bottom of four pull clips (inserted from the bottom up).
-open the trunk lid.
-in the opening of the trunk pulls out five caps.
-from the trunk, Unscrew the nuts that attach the bumper to the amplifier rear panel.
-from the bottom Unscrew the nuts that attach the booster to the side members.
-with the assistant gently pulls the bumper back.
-remove the connectors from the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español