How to remove the front and rear bumper Mitsubishi Space Star (2012–2023)

Mitsubishi Space Star II (2012–2023)

Depending on the year of manufacture, the attachment points differ slightly.

Front bumper

-open the hood.

-under the hood, unscrew the four bolts (spun down) that secure the upper part of the bumper.

-take out the seven caps and unscrew the two screws (inserted and tightened from the bottom up) that secure the protection to the bottom of the bumper.

-depending on which side we will disassemble, turn the wheels to the side.

-in the wheel wells take out two pistons on each side that secure the fender liner (front).

-move the fender liner to the side and take out one piston on each side (inserted from the bottom up) that attach the corners to the wings.

-in the lower grille, in front of the bumper, Unscrew the two screws.

-we release the latch in the wings (take the corner and pull towards you).

-with an assistant, carefully pull the front bumper forward (look for the wires).

-disconnect the fog lamp connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew two screws on each side and remove the rear lights (hold on the latches, pull towards you).

-under the taillights, unscrew the two screws (in earlier versions, these screws are available without dismantling the taillights).

-wheel arches take out three pistons on each side that secure the fender liner (rear).

-behind the fender liner, we take out one piston on each side (inserted from the bottom up) that attach the corners of the rear bumper to the wings.

-take out the four pistons from the bottom (inserted from the bottom up).

-we release the latch in the wings (pull the corners towards you).

-with an assistant, gently pull the bumper back (look behind the wires).

-disconnect the connectors for the license plate lighting and parking sensors (if any).

How to remove front and rear bumper Mitsubishi Space Star (1998–2005)