How to remove front and rear bumper Mitsubishi Mirage (2012–2023)

Mitsubishi Mirage VI (2012–2023)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood, unscrew the four bolts that secure the upper part of the bumper.

-from the bottom, take out the seven caps and unscrew the two screws (inserted and screwed up).

-turn the wheels to the side.

-in the wheel arches, take out two pistons on each side and release the fender liner (front).

-for the fender liner, we take out one piston on each side (inserted from the bottom up) that attach the corners of the bumper to the wings.

-unscrew the two bolts in the lower bumper grille.

-we release the latch in the wings (pull the corners towards you).

-with an assistant, gently pull the bumper forward (look behind the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew two screws on each side and remove the rear lights (hold on the latches, pull towards you).

-under the rear lights, unscrew the two screws.

-wheel arches take out three pistons on each side that secure the fender liner (rear).

-take out one piston on each side (inserted from the bottom up) that attach the corners of the bumper to the wings.

-take out the four pistons from the side of the bottom that secure the lower part.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, carefully pull the rear bumper back (look behind the wires).

-disconnect electrical connectors.

How to remove front and rear bumper Mitsubishi Mirage (1995–2003)