Depending on the year of release of attachment is different.
-open the hood.
-under the hood take out the caps and Unscrew the screws (twisted and inserted top to bottom) that secure the top and the grille.
-wrenched the wheel to the side.
-wheel arches take out the rivets and removed the fender liner.
-attach the fender liner to the side and Unscrew three screws on each side (spun upwards) holding the corners of the bumper to the wings.
-perimeter Unscrew the screws that attach the lower part (can be caps).
-with the assistant pulls the bumper forward.
-remove the connectors from the equipment (if any).
-open the trunk lid.
-in the trunk behind the panels Unscrew the nut released from the latches and remove the tail lights.
-the rear lights take out the caps (two or three depending on year).
-in the wheel wells, Unscrew the screws, remove the caps and release the fender liner.
-Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.
-Unscrew the screws around the perimeter of the bottom.
-we release the latch in the wings (pull the corners themselves).
-with the assistant gently pulls the bumper back.
-snap together the connectors of electrical equipment.