How to remove front and rear bumper Mitsubishi Endeavor

Mitsubishi Endeavor (2002-2011)

Depending on the year of manufacture, the attachment points differ slightly.

Front bumper

-open the hood.

-under the hood take out the caps and unscrew the screws, remove the grille (holds on latches).

-under the grille, unscrew the screws (may be nuts) that secure the upper part of the bumper.

-unscrew the two screws in the lower bumper grille (spun up).

-from the bottom, take out the caps and unscrew the screws that secure the lower part to the protection and fender liner.

-turn the wheels, depending on which side we will disassemble.

-in the wheel wells take out the caps that secure the fender liner (front).

-move the fender liner to the side and unscrew two screws on each side that attach the corners to the wings.

-with an assistant, gently pull the bumper forward (look behind the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-unscrew two screws on each side and remove the tail lights.

-under the rear lights, unscrew one screw on each side.

-in the opening of the trunk, unscrew the nine screws.

-from the bottom, take out the caps and unscrew the screws (inserted and tightened from the bottom up) that secure the lower part.

-unscrew two screws on each side of the trunk, in the inner part of the wings.

-wheel arches take out the caps that secure the fender liner (rear).

-for the fender liner, unscrew one screw on each side that attach the corners of the bumper to the wings.

-with an assistant, pull the rear bumper back (look for the wires).

-disconnect electrical connectors (if any).