Mitsubishi Pajero/ Montero IV (2006-2023)

Depending on the year of manufacture, the attachment points may differ.

Front bumper

-open the hood.

-under the hood take out the six caps that secure the grille.

-release from the latches (pull the grate towards you and pull it up) and remove the grate.

-under the grille take out six caps (inserted from top to bottom).

-turn the wheels, depending on which side we will disassemble.

-in the wheel wells take out the caps and unscrew the screws that secure the fender liner and wing lining (front).

-we release the lining of the wings from the bumper (hold on the latches, pull up from the bottom).

-remove the fender liner to the side and unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-from the bottom, unscrew the screws.

-we release the latch in the wings (pull the corners towards you).

-with an assistant, carefully pull the bumper forward (be careful not to break the wires and hoses).

-remove connectors from electrical equipment (if any).

-(if any) disconnect the washer hoses (liquid may leak from the tank).

Mitsubishi Pajero/ Montero IV (2006-2023) front bumper attachment points

Mitsubishi Pajero/ Montero IV (2006-2023) front bumper mounting scheme

 

Rear bumper

⇒Tips for removing bumpers and how to avoid breaking anything..⇐

The rear bumper consists of three parts. First, the central part is removed, then the side parts.

-open the tailgate.

-in the opening of the trunk, unscrew the five screws, and take out two pistons.

-from the bottom, unscrew the two screws, take out the two pistons and remove the central part of the bumper.

-unscrew two screws on each side and remove the tail lights.

-unscrew the four screws under the rear lights.

-in the opening of the trunk take out the caps.

-in the wheel wells, unscrew the screws and take out the caps that secure the fender liner and wing lining.

-we release the lining of the wings from the bumper (hold on the latches, pull towards you from the bottom up).

-move the fender liner to the side and unscrew one screw on each side that secures the corners of the side parts to the wings (spun up).

-remove the side of the rear bumper.

-when dismantling, pay attention to the wires.

rear bumper mounting points Mitsubishi Pajero/ Montero IV (2006-2023)

rear bumper mounting points Mitsubishi Pajero/ Montero IV (2006-2023)

Mitsubishi Pajero/ Montero IV (2006-2023) rear bumper mounting scheme

Mitsubishi Pajero/ Montero IV (2006-2023) rear light attachment diagram

 

How to remove front and rear bumper Mitsubishi Pajero (Montero/Shogun) 2 (1991-2004)

How to remove front and rear bumper Mitsubishi Pajero (Montero/Shogun) 3 (1999-2006)