How to remove front and rear bumper Mitsubishi Mirage

Depending on the model year and body type of attachment may vary.

Front bumper

-open the hood.

-under the hood, take out the clips and remove the grille (held by the latches).

-Unscrew one screw on each side and pull forward indexes of turns.

-through the opening of the turn indicators Unscrew one screw on each side.

-Unscrew two screws on each side (spun up) that secure the bumper reinforcement to the body.

-wrenched the wheel to the side.

-wheel arches take out the rivets that attach the fender liner.

-Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-take out the rivets that attach the lower part.

-with the assistant pulls the bumper in front.

-remove the connectors from the equipment (if any).

Rear bumper

-open the trunk lid.

-in the trunk, Unscrew the four bolts (twisted from top to bottom) that fasten the amplifier bumper to the body.

-Unscrew one screw on each side in the wings.

-in the wheel wells, Unscrew the screws and peel the fender liner.

-Unscrew one screw on each side (spun upwards) holding the corners of the bumper to the wings.

-with the assistant gently pulls the bumper back.

-remove the connectors from the equipment (if any).