Depending on the year of release of attachment is different.
-under the hood, Unscrew the five screws that secure the top.
-wrenched the wheel, depending on which side we will analyze first.
-wheel arches Unscrew the screws that attach the fender liner.
-attach the fender liner to the side and Unscrew the screws (spun upwards) holding the corners of the bumper to the wings.
-Unscrew the screws that attach the lower part.
-Unscrew two bolts on each side (spun upwards) that secure the iron the amplifier bumper to the body.
-with the assistant pulls the bumper forward.
-remove the connectors from the equipment (if any).
-open the trunk lid.
-in the boot remove the side trim.
-for casings, Unscrew the nuts and remove the tail lights and Unscrew the screws that attach the bumper to the wings.
-the rear lights take out the caps.
-in the wheel wells, Unscrew the screws, remove the caps and release the fender liner.
-Unscrew the screws (spun upwards) holding the corners of the bumper to the wings.
-Unscrew the screws around the perimeter of the bottom.
-Unscrew the bolts (spun up) that secure the bumper reinforcement to the body.
-with the assistant gently pulls the bumper back.
-snap together the connectors of electrical equipment.