Depending on the year of release of attachment is different.

Front bumper

-open the hood.

-under the hood, Unscrew the three screws that secure the top.

-(if you have one) remove the turn signal and Unscrew the screws under them.

-wrenched the wheel depending on which side we understand.

-wheel arches take out the rivets that attach the fender liner.

-remove the fender liner to the side and Unscrew the screws (might be clips) that secure the corners of the bumper to the wings.

-perimeter of the lower part and pull out the caps and Unscrew the screws.

-with the assistant pulls the bumper forward (don't want to break the wires and hoses) (until 2002 release latch in the wings, pull the corners in and forward).

-remove the connectors from the equipment (if any).

-switched the hoses to the washer (can leak fluid).

scheme of fastening of front bumper Mitsubishi Space Star

scheme of fastening of front bumper Mitsubishi Space Star

Rear bumper

-open the trunk lid.

-in the opening of the trunk, Unscrew the six screws.

- Unscrew the screws around the perimeter of the bottom.

-in the wheel wells, Unscrew the screws and take out the rivets that attach the fender liner and mud flaps.

-Unscrew the screws holding the corners of the bumper to the wings.

-with the assistant pulls the bumper back.

diagram of rear bumper Mitsubishi Space Star