Mitsubishi L200/Triton V (2015-2023) (Fiat Fullback, RAM 1200)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood take out eight caps and remove the trim over the grille.
-under the trim, take out the two pistons, release them from the latches and remove the grille.
-grid unscrew the three bolts that secure the upper part of the bumper.
-from the bottom take out six caps (inserted from the bottom up).
-turn the wheels to the side.
-in the wheel arches, unscrew two screws on each side, which are the lining of the arches (wing fenders).
-we release the lining of the arches from the bumper.
-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-with an assistant, gently pull the bumper forward (look behind the wires).
-disconnect electrical connectors.
Rear bumper
-before removing the rear bumper, disconnect the electrical connectors from the bottom side.
-from the side of the bottom, unscrew the four bolts that attach the brackets to the side members (you need a long knob with a head, the bolts are hard to unscrew).
-with an assistant, gently pull the bumper back.
How to remove front and rear bumper Mitsubishi L200/Triton III
How to remove front and rear bumper Mitsubishi L200/Triton IV