Kia Stinger I CK (2017+)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-take out the five caps around the hood lock (inserted from top to bottom).
-unscrew one screw on each side that secures the edges of the upper part of the bumper to the wings (the screws are hidden under the plastic pads)
-at the bottom of the bumper take out seven caps (inserted from the bottom up) that secure the protection.
-turn the wheels to the side.
-in the wheel wells take out three pistons on each side that secure the fender liner (front).
-unscrew one screw on each side that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-we release the latches above the headlights (pull up).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
The bumper is removed together with the metal amplifier.
-open the trunk lid.
-near the rear lights, remove the pads (hold on snaps).
-unscrew the two screws and two nuts, remove the rear lights (hold on the latches, pull towards you).
-remove reflective elements (hold on latches).
-under the rear lights, unscrew the two screws and take out the two pistons.
-wheel arches take out three pistons on each side that secure the fender liner (rear).
-unscrew one screw on each side that attach the corners of the bumper to the wings.
-from the bottom take out the caps.
-in the trunk, remove the rear trim and release the edges of the side trim.
-behind the skins, unscrew the seven bolts that secure the bumper amplifier to the body and disconnect the electrical connector.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper back (look for the wires).
-release electrical connectors.