-
-
-
KIA Cerato (Spectra, Sephia) I LD (2003-2008)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood take out the caps that secure the trim over the grille.
-under the trim, Unscrew the two screws.
-at the bottom, take out ten caps (inserted from the bottom up).
-turn the wheels to the side.
-in the wheel arches, we release the fender liner (front).
-for the fender liner, unscrew one screw on each side (spun up) that secure the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors (if any).
Rear bumper
-open the trunk lid.
-from the trunk, unscrew the nuts and remove the rear lights.
-under the rear lights take out the four pistons and Unscrew the two screws.
-take out the four pistons in the opening of the trunk.
-at the bottom of the bumper take out the caps and Unscrew the screws.
-in the wheel wells, unscrew the screws that secure the fender liner (rear).
-unscrew one screw on each side that secures the corners of the bumper to the wings (spun up).
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español