KIA Carens (Rondo) III RP (2013-2019)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood, unscrew the screws and take out the caps that secure the trim on the top of the bumper.

-on the perimeter of the lower part, Unscrew the screws and take out the caps.

-turn the wheels to the side.

-in the wheel wells, unscrew three screws on each side that secure the fender liner (front).

-move the fender liner to the side and Unscrew one screw on each side (spun up) that secure the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look behind the wires and hoses).

-disconnect electrical connectors.

-(if any) disconnect the headlight washer hoses.

front bumper attachment points KIA Carens (Rondo) III RP (2013-2019)

Front bumper mounting scheme KIA Carens (Rondo) III RP (2013-2019)

 

Rear bumper

-open the trunk lid.

-unscrew two screws on each side and remove the tail lights.

-under the rear lights, unscrew the two screws and take out the two pistons.

-at the bottom of the bumper, Unscrew the screws and take out the caps (those that attach the bumper to the amplifier do not need to be touched).

-in the wheel wells, Unscrew three screws on each side that secure the fender liner (rear).

-unscrew one screw on each side that attach the corners of the bumper to the wings.

-from the bottom side, unscrew the four bolts that secure the bumper amplifier to the body.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.

rear bumper attachment points KIA Carens (Rondo) III RP (2013-2019)

KIA Carens (Rondo) III RP (2013-2019) rear light attachment scheme

Mounting scheme rear bumper KIA Carens (Rondo) III RP (2013-2019)

Mounting scheme rear bumper KIA Carens (Rondo) III RP (2013-2019)