Depending on the year of release of the attachment can vary.

Front bumper

-under the hood take out the caps (inserted from top to bottom) that secure the upper part.

-take out the caps and Unscrew the screws at the bottom (twisted and inserted from the bottom up).

-wrenched the wheel left or right, depending on which side of the bed will disassemble.

-wheel arches, peel the fender liner.

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-with the assistant release the latch in the wings and pulls the bumper itself.

-remove the connector from the fog lamp (if any).

-remove connector from the PDC (if any).

the attachment of the front bumper of KIA Sorento (after 2009)

the scheme of fastening of the front bumper of KIA Sorento (after 2009)

Rear bumper

The bumper is removed together with the amplifier.

-in the opening of the trunk Unscrew two screws on each side and remove the tail lights.

-the rear lights take out two pistons and Unscrew one screw on each side.

-wheel arches Unscrew the screws that attach the fender liner.

-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-from under the car Unscrew two bolts on each side that attach the bumper reinforcement to the body.

-with the assistant release the latch in the wings and opening the trunk, pulls the bumper from the guides themselves.

-remove the connectors from the equipment (if any).

the attachment of the rear bumper of KIA Sorento (after 2009)

scheme of fastening of tail light KIA Sorento (after 2009)

the scheme of fastening the rear bumper of KIA Sorento (after 2009)

the scheme of fastening the rear bumper of KIA Sorento (after 2009)

the scheme of fastening the rear bumper of KIA Sorento (after 2009)