How to remove front and rear bumper Kia Picanto (2011-2017)

Kia Picanto / Morning II (TA) (2011-2017)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood take out the four clips (inserted from top to bottom) that secure the upper part of the bumper.

-take out the caps (inserted from the bottom up) that secure the lower part.

-turn the wheels to the side.

-in the wheel arches, we release the fender liner (front).

-unscrew one screw on each side that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors (if any).

Rear bumper

-open the trunk lid.

-in the opening of the trunk, unscrew the screws and remove the rear lights.

-under the rear lights, unscrew the two screws and take out the two pistons.

-in the wheel wells, unscrew three screws on each side that secure the fender liner (rear).

-unscrew one screw on each side that attach the corners of the bumper to the wings.

-from the bottom take out the caps (inserted from the bottom up).

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.

How to remove front and rear bumper KIA Picanto (2004-2010)

How to remove front and rear bumper Kia Picanto (2017+)