-
-
-
KIA Ceed III CD (2018+)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood take out six caps (inserted from top to bottom) that secure the upper part of the bumper.
-at the bottom, take out eight caps (inserted from the bottom up).
-turn the wheels to the side.
-in the wheel wells take out three pistons on each side that secure the fender liner (front).
-for the fender liner, unscrew one screw on each side (spun up) that secure the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
The bumper is removed along with the amplifier.
-open the trunk lid.
-remove the lining near the rear lights (hold on latches, you need to pry with a flat screwdriver).
-unscrew two screws on each side and remove the rear lights (held by latches).
-under the rear lights take out the two pistons and Unscrew the two screws.
-at the bottom of the bumper take out the caps (except those that attach the bumper to the amplifier).
-in the wheel wells, unscrew three screws on each side that secure the fender liner (rear).
-unscrew one screw on each side that attach the corners of the bumper to the wings.
-from the bottom side, unscrew the four bolts that secure the bumper amplifier to the body.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español