Depending on the year of release of the attachment can vary.
Front bumper
-under the hood, Unscrew the screws and remove the headlamp.
-behind the headlights, the wings, Unscrew the nut.
-Unscrew the screws and take out the rivets that secure the upper part.
-take out the caps and Unscrew the screws at the bottom (twisted and inserted from the bottom up).
-wrenched the wheel left or right, depending on which side of the bed will disassemble.
-wheel arches, peel the fender liner.
-Unscrew one screw on each side (spun upwards) holding the corners to the fenders
-assistant exempt the bumper and pulls on itself.
-remove the connector from the fog lamp (if any).
Rear bumper
-in the opening of the trunk pulls out four clips.
-in the trunk remove the plastic cover.
-for the trim, under the rear lights, Unscrew the screws and nuts.
-wheel arches Unscrew the screws that attach the fender liner.
-for wheel arch liners Unscrew one screw on each side (spun upwards) holding the corners to the wings.
-Unscrew the screws and take out the caps at the bottom of the bumper.
-with the assistant pulls the bumper itself.