KIA Cerato IV / Forte III BD (2018+)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood, unscrew the four screws that secure the upper part of the bumper (spun down).

-on the perimeter of the lower part we take out seven caps (inserted from the bottom up).

-turn the wheels to the side.

-in the wheel wells take out three pistons on each side that secure the fender liner (front).

-unscrew one screw on each side (spun up) that secure the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors (if any).

Front bumper mounting scheme KIA Cerato IV / Forte III BD (2018+)

 

Rear bumper

-open the trunk lid.

-in the side panels of the trunk, open the hatches and Unscrew four nuts on each side, remove the rear lights.

-under the rear lights take out one piston and Unscrew one screw on each side.

-at the bottom of the bumper take out the caps that secure the side protection.

-wheel arches take out three pistons on each side that secure the fender liner (rear).

-unscrew one screw on each side that attach the corners of the bumper to the wings.

-from the back of the bumper, unscrew the four bolts that secure the amplifier to the body.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.

Rear bumper mounting scheme KIA Cerato IV / Forte III BD (2018+)

Rear light mounting diagram KIA Cerato IV / Forte III BD (2018+)