Front bumper

-open the hood.

-take out the caps and remove the strip over the grille.

-under the pickguard, Unscrew the screws (spun down).

-Unscrew the screws around the perimeter at the bottom.

-wrenched the wheel left or right, depending on which side of the bed will disassemble.

-wheel arches, peel the fender liner.

-attach the fender liner to the side and wrenched the screws (spun upwards) holding the corners to the fenders

-with the assistant pulls the bumper from the guides themselves.

-remove the connector from the fog lamp (if any).

-remove the connector from the Parking assist sensors (if any).

the attachment of the front bumper of the KIA Magentis II (2005-2010)

the scheme of fastening of the front bumper of the KIA Magentis II (2005-2010)

Rear bumper

-remove the rear lights and pulls them under the caps.

-at the corners of the opening of the trunk, Unscrew the screws.

-Unscrew the screws and take out the caps at the bottom of the bumper.

-wheel arches, peel the fender liner.

-attach the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners to the wings.

-with the assistant pulls the bumper itself.

-remove the connector from the Parking assist sensors (if any).

the attachment of the rear bumper KIA Magentis II (2005-2010)

the scheme of fastening of the rear bumper KIA Magentis II (2005-2010)