KIA Carens (Rondo) II UN (2006-2012)
Depending on the year of release of attachment is different.
Front bumper
-under the hood take out the rivets, remove the trim and grille.
-Unscrew the screws under the grille.
-on the perimeter in the bottom part Unscrew the screws (spun up).
-wrenched the wheel left or right, depending on which side of the bed will disassemble.
-wheel arches Unscrew the screws that attach the fender liner.
-attach the fender liner to the side and wrenched one screw on each side (spun upwards) holding the corners to the fenders
-with the assistant pulls the bumper from the guides themselves.
-remove the connector from the fog lamp (if any).
-remove the connector from the Parking assist sensors (if any).
Rear bumper
-open the boot lid and twisted in the opening three screws on each side that secure the tail lights.
-remove the rear lights and pulls them under the caps.
-at the corners of the opening of the trunk, Unscrew the screws.
-Unscrew the screws at the bottom of the bumper.
-in the wheel wells, Unscrew the screws and take out the clips holding the wheel arch liners (to remove the wheels easier to turn a ratchet with a nozzle).
-attach the fender liner to the side and Unscrew one screw on each side (spun upwards) holding the corners to the wings.
-with the assistant pulls the bumper itself.
-remove the connector from the Parking assist sensors (if any).
How to remove front and rear bumper KIA Carens (2000-2002)
How to remove front and rear bumper KIA Carens I (2002-2006)
How to remove front and rear bumper KIA Carens III (2013-2019)