How to remove the front and rear bumper Kia Cadenza / K7 (2010-2016)

Kia Cadenza / K7 I (VG) (2010-2016)

Depending on the year of manufacture, the attachment points may vary slightly.

Front bumper

-open the hood.

-under the hood, remove the air intake.

-take out the caps (inserted from top to bottom) that secure the upper part of the bumper.

-take out the six caps (inserted from the bottom up), which are the lower part of the bumper.

-turn the wheels to the side.

-in the wheel wells take out the caps that secure the fender liner (front).

-unscrew one screw on each side that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper forward (look behind the wires and hoses).

-disconnect electrical connectors.

- (if any) disconnect the headlight washer hoses (liquid may leak).

Rear bumper

-open the trunk lid.

-remove the lining near the rear lights.

-from the trunk, unscrew four nuts on each side and remove the rear lights.

-in the opening of the rear lights take out the two pistons and Unscrew the two screws.

-in the wheel wells, unscrew the screws that secure the fender liner (rear).

-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-from the bottom take out the caps in the sides of the bumper.

-from the back of the bumper, Unscrew the four bolts that secure the amplifier to the body.

-we release the latch in the wings (pull the corners of the bumper towards you).

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.