-
-
-
Kia Sorento IV MQ (2020+)
Front bumper
-open the hood.
-under the hood take out eight caps that secure the trim over the grille.
-we release the trim from the latches in the headlights (indicated by blue arrows, pull up).
-unscrew the eight screws (spun up) that secure the lower part of the bumper.
-turn the wheels to the side.
-wheel arches take out three pistons on each side that secure the fender liner (front).
-for the fender liner, unscrew one screw on each side that attach the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-in the opening of the trunk, take out the plugs, unscrew the screws and remove the rear lights (hold on the latches in the wings, pull towards you).
-under the rear lights take out two pistons on each side.
-wheel arches take out the caps and unscrew the screws that secure the fender liner (rear).
-unscrew one screw on each side that attach the corners of the bumper to the wings.
-from the bottom, take out the caps and Unscrew the screws that secure the plastic shields.
-we release from fastenings the back part of the muffler.
-behind the shields, unscrew two bolts on each side that secure the bumper amplifier to the body.
-we release the latch in the wings (pull the corners of the bumper towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español