How to remove front and rear bumper Audi A1 (2018+)

Audi A1 II (GB) (2018+)

Front bumper

 

-open the hood.

-under the hood, unscrew the screw and take out the caps that secure the top.

-unscrew three screws on each side and release the fender liner (front).

-unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-unscrew the screws from the bottom (spun up).

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the clamps at the top.

-with an assistant, pull the bumper forward (look behind the wires and hoses).

-disconnect electrical connectors.

-(if any) disconnect the headlight washer hoses.

front bumper attachment points Audi A1 II (GB) (2018+)

Front bumper mounting diagram Audi A1 II (GB) (2018+)

 

Rear bumper

 

-open the trunk lid.

-in the wheel arches, unscrew three screws on each side and release the fender liner (rear).

-for the fender liner, unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-from the bottom, unscrew the screws and take out the caps.

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches under the rear lights.

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.

rear bumper attachment points Audi A1 II (GB) (2018+)

Rear bumper mounting diagram Audi A1 II (GB) (2018+)

 

How to remove front and rear bumper Audi A1 (2010-2018)