How to remove front and rear bumper Audi A3 8V (2013-2020)

Audi A3 III 8V (2013-2020)

The attachment points may differ slightly depending on the year of manufacture.

Front bumper

-open the hood.

-under the hood, unscrew the three screws that secure the upper part.

-unscrew the nine screws at the bottom of the bumper (twisted and inserted from bottom to top).

-wheel the wheels to the side.

-unscrew the screws in the wheel arches that secure the wheel arch liners.

-we move the wheel arch liners to the side and unscrew two screws on each side that secure the sides of the bumper to the fenders.

-with an assistant, release the latches in the wings and pull the bumper forward (look behind the wires and hoses).

-disconnect the connectors of the electrical equipment.

-snap off the headlight washer hoses (liquid may leak).

Rear bumper

-open the trunk lid.

-remove the rear panel trim (pull up).

-from the trunk behind the trim, through the holes, unscrew the four nuts.

-remove the rear lights.

-in the opening of the rear lights, pull out the clips up.

-unscrew three screws on each side in the wheel arches that secure the wheel arches to the bumper.

-unscrew the two screws from the bottom.

-release the latches in the wings (pull the corners towards you).

-with an assistant, we pull the bumper back (look behind the wires).

-disconnect the connectors of the electrical equipment (if any).

How to remove front and rear bumper Audi A3 8L (1996-2003)

How to remove front and rear bumper Audi A3 8P (2003-2012)