Front bumper

-remove the bottom part of the bumper grille

-Unscrew and take out fog lights (if equipped)

-for fog lights Unscrew on each side, one bolt that attach the bumper reinforcement to the body (the location of the bolts indicated by the arrows)

-under the lights remove the cilia, under which Unscrew one bolt on each side.

-Unscrew the wheel left or right depending on which side of the bumper will loosen first.

-Unscrew the screws attaching the fender liner to the bumper.

-pulls off the edge of the bumper with side locks (the edge of the bumper and pull down on themselves)

-remove the bumper

mounting points for the front bumper AUDI 100 C4

Rear bumper

-Unscrew the screws connecting the bumper with the fender liner.

-take out the cargo compartment carpet .

-under the Mat Unscrew two bolts on each side.

-pulls off the edge of the bumper with side locks (the edge of the bumper and pull down on themselves).

-take out the bumper itself (it is advisable to do it alone, so as not to scratch the paint on the wings).

rear bumper mounting scheme AUDI 100 C4

mounting points for the rear bumper AUDI 100 C4