Mazda 3 IV (BP) (2019+)

Depending on the year of manufacture and body type, the attachment points differ slightly.

Front bumper

-open the hood.

-under the hood take out the caps and unscrew the screws that secure the upper part of the bumper (pad).

-from the bottom, take out the caps and unscrew the screws (twisted and inserted from the bottom up) that secure the lower part of the bumper.

-turn the wheels to the side.

-in the wheel wells take out the caps that secure the fender liner (front).

-move the fender liner to the side and unscrew one screw on each side (spun up) that attach the corners of the bumper to the wings.

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the clamps at the top.

-with an assistant, pull the bumper forward (look for the wires).

-disconnect electrical connectors.

Mazda 3 IV (BP) (2019+) front bumper attachment points

Mazda 3 IV (BP) (2019+) front bumper attachment points

 

Rear bumper

-Open the trunk lid.

-from the trunk, unscrew the nuts and remove the rear lights.

-(Sedan) under the rear lights, Unscrew the two screws.

-in the opening of the trunk, unscrew the two screws (four screws in the Hatchback model).

-in the wheel wells, Unscrew the screws and take out the caps that secure the fender liner (rear) and unscrew one screw on each side that attach the corners of the bumper to the wings.

-at the bottom of the bumper, Unscrew the screws (spun up).

-we release the latch in the wings (pull the corners of the bumper towards you).

-we release the latches (latches) under the rear lights.

-with an assistant, pull the bumper back (look for the wires).

-disconnect electrical connectors.

rear bumper mounting points Mazda 3 IV (BP) (2019+)

rear bumper mounting points Mazda 3 IV (BP) (2019+)