-
-
-
Depending on the year the site of attachment differs.
Front bumper
-open the hood.
-under the hood take out two piston and Unscrew the two screws that secure the top.
-Unscrew the screws (spun up) that secure the lower part.
-depending on which side we will disassemble, wrenched the wheel.
-wheel arches take out the rivets and removed the arch liners (no need to remove).
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-we release the latch in the wings (pull the corners themselves)
-pulls the bumper forward (don't want to break the wires).
-remove the connectors from the fog lights (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew three screws on each side and remove the tail lights.
-Unscrew the struts of the trunk lid.
-Unscrew the five screws (spun up) that secure the lower part.
-in the wheel wells, Unscrew the screws and peel the fender liner (no need to remove).
-attach the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.
-we release the latch in the wings (pull the corners themselves).
-pulls the bumper backwards (look for wires).
-snap together the connectors for the license plate lighting.
English 
Italiano 
Français 
русский 
Deutsch 
Español