-
-
-
Front bumper
-open the hood.
-under the hood, Unscrew one screw (twisted upside down).
-Unscrew the screws that secure the lower part of the bumper (spun up).
-depending on which side we will disassemble, wrenched the wheel.
-wheel arches free lockers (front part).
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-with the assistant pulls the bumper forward (don't want to break the wires).
-snap together the connectors of the equipment (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew the three screws.
-from the bottom, between bumper and body, Unscrew the three screws.
-in the wheel wells, Unscrew the screws holding the fender liner (rear part).
-attach the fender liner to the side and Unscrew one screw on each side holding the bumper corners to the wings.
-with the assistant pulls the bumper backwards (look for wires).
-snap together the connectors of the equipment (if any).
English 
Italiano 
Français 
русский 
Deutsch 
Español