-
-
-
Depending on the year of release of attachment is different.
Front bumper
-open the hood.
-under the hood take out the caps (Unscrew the screws) that secure the grille.
-(up to 2001) remove the grille, pull it under the caps and Unscrew the screws.
-around the bottom part Unscrew the screws and take out the caps.
-depending on which side we will disassemble, wrenched the wheel.
-in the wheel wells, Unscrew the screws, remove the caps and removed the wheel arch liners (no need to remove).
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-we release the latch in the wings (pull the corners themselves)
-pulls the bumper forward (don't want to break the wires).
-remove the connectors from the fog lights (if any).
Rear bumper
-open the trunk lid.
-in the opening of the trunk, Unscrew the screws that secure the top.
-Unscrew the screws (spun up) that secure the lower part.
-in the wheel wells, Unscrew the screws and peel the fender liner.
-for wheel arch liners Unscrew one screw on each side holding the bumper corners to the wings.
-we release the latch in the wings.
-pulls the bumper backwards (look for wires).
-snap together the connectors of electrical equipment.
English 
Italiano 
Français 
русский 
Deutsch 
Español