-
-
Citroen C4 Picasso II (2013-2022)
Depending on the year of manufacture, the attachment points may vary slightly.
Front bumper
-open the hood.
-under the hood take out the caps that secure the lining and the upper part of the bumper.
-we release the connectors of the turn signal repeaters.
-depending on which side we will disassemble, turn the wheels.
-in the wheel wells, unscrew the screws that secure the fender liner (front).
-move the fender liner to the side and Unscrew one screw on each side (spun down) that secure the corners of the bumper and clips.
-remove the plastic retaining strips in the wings (pull towards you).
-on the perimeter of the lower part, Unscrew the screws (spun up).
-we release the latch under the hood.
-we release the clips in the wings (pull the corners of the bumper down).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the trunk lid.
-from the bottom, unscrew nine screws (spun up).
-in the wheel wells, unscrew the screws that secure the fender liner (rear), bumper corners and retaining straps.
-we release the fixing strips in the wings (you need to pull towards you).
-we release the clips in the wings (pull the corners of the bumper down).
-we release the latch in the opening of the trunk (pull towards you).
-with an assistant, pull the bumper back (look for the wires).
-disconnect electrical connectors.
English 
Italiano 
Français 
русский 
Deutsch 
Español