Citroen Jumpy (Dispatch) III (2016-2023)
Front bumper
-open the hood.
-under the hood, unscrew the screws that secure the top.
-from the bottom, unscrew the eight screws.
-unscrew three screws on each side in the wheel arches that secure the fender liner (front).
-unscrew the screws that secure the corners of the bumper to the wings.
-we release the clips in the inner part of the wings.
-we release the clips under the hood.
-with an assistant, pull the bumper forward from the guides in the wings (be careful not to break the wires).
-disconnect the connectors from the electrical equipment (if any).
Rear bumper
-open the lid (doors) of the trunk.
-remove the lining under the rear lights.
-in the opening of the trunk, Unscrew the screws.
-unscrew the screws from the bottom (spun up).
-in the wheel wells, unscrew the screws that secure the fender liner (rear).
-for the fender liner, unscrew the screws that secure the corners of the bumper to the wings.
-we release the latch in the wings (pull the corners towards you).
-we release the latch in the opening of the trunk.
-with an assistant, pull the bumper back (we'll look at the wires).
-disconnect electrical connectors.