Citroen Berlingo I M49 (1992-2002)
Front bumper
-open the hood.
-under the hood, unscrew the screws, take out the caps and remove the grille.
-from the bottom, unscrew the screws (spun up).
-depending on which side we will disassemble turn the wheels.
-in the wheel arches release the fender liner.
-unscrew two screws on each side that secure the corners of the bumper to the wings.
-from the side of the engine compartment, unscrew the two screws that secure the amplifier to the body (or release the bumper latches in the amplifier).
-pulls the bumper forward (be careful not to break the wires).
-with an assistant, pull the bumper forward (look for the wires).
-disconnect electrical connectors.
Rear bumper
-open the lid (doors) of the trunk.
-in the opening of the trunk, Unscrew the five screws.
-remove the rear lights.
-under the rear lights, Unscrew the two screws.
-unscrew the screws at the bottom (spun up)
-in the wheel arches release the fender liner.
-unscrew the screws that secure the corners of the bumper to the wings.
-carefully pull the bumper back (look behind the wires).